HELMET FEATURES
G-FORCE Racing Gear makes the extra effort to build
the best helmet at an affordable price. Check out
the G-FORCE Racing Gear helmets quality and features
and see how our quality and features blow the
competition away.
Snell SA2000 - M2000. Our customers have asked what
the difference is between a Snell SA2000 and M2000
certification for a helmet. All Snell tests for
these specifications include multiple impact tests
at -20 degrees, 78 degrees (dry and wet) and 120
degrees. The Snell M2000 specification is the base
for the specs. The SA2000 - used primarily for auto
racing - adds not only the thicker shield, but also
the use of flame retardant paint, trim, retention
strap and interior. The Snell SA2000 helmet also
meets an additional rollbar impact test.
Composite Z38 lightweight shell. Made from a
Kevlar/Fiberglass composite with a specially
designed resin. This means less weight on your
shoulders and less energy spent holding your head
up.
Reinforced mounting points. G-FORCE Racing Gear was
the first ever to have special reinforced mounting
points for a helmet restraint system built into the
helmet.
Our helmet paint finish sets the standard of
quality. The paint finish on the G-FORCE Racing Gear
helmets outshines our competitors. Every helmet
receives multiple coats of paint and clearcoat.
Every coat is hand sanded and the top coat is buffed
to a show car finish. Our extra attention to this
detail gives our customers a helmet that better
withstands the punishment a race environment can
dish out.
Hi-tech G-78 impact liner. Provides superior impact
resistance compared to the liners used by our
competitors.
G-Flow Ventilation. Our helmets have a
well-engineered ventilation system for maximum
driver comfort. Together with Fresh Air Systems
Technologies® we designed the Force Air helmet for
excellent air flow right out of the box.
Room for eyeglasses. Our R & D team designed
eyeports to accept glasses in our new comfort fit
system. No more wadding up those wire frame glasses
or peeling off your skin inserting glasses into the
helmet. This new system really works great.
CoolTec Fire-Retardant Interior. This material used
in our SA helmets provides unequaled protection for
the driver. CoolTec is a new flame-retardant
material that is soft and hypoallergenic to the skin
and outperforms most other products.
Optically Correct Molded Shield with
scratch-resistant S231 coating. We went to the added
cost of using a very expensive mirror polished mold
to produce our shields. Most manufacturers cut
theirs out of a sheet, lay it on a form in an oven
in order to bend it to fit their helmet. Have you
ever bent a sheet of plastic and noticed how it
distorts your view? G-FORCE Racing Gear went to the
expense of a mold so you could have a clear view on
the track. All of our shields are coated with a
top-of-the-line scratch resistant coating.
Thick shield for protection. We were the first
manufacturer to include, at no extra charge, the
same thick shield required on Snell SA-rated helmets
on all of our Snell M-rated helmets. The competition
uses thinner shields on their M-rated helmets.
SpeedFit shield. G-FORCE Racing Gear was the first
to develop the SpeedFit shield for SA-rated auto
racing helmets. This new design allows the shield to
be changed in a matter of seconds without the use of
any tools.
Breath Deflector. G-FORCE Racing Gear has engineered
a unique breath deflector for our helmets. It helps
to keep your shield fog free and is easily removed
for cleaning. This helps give the driver a clear
view, even on humid days and evenings. Most helmet
manufactures sell a breath deflector as an expensive
option and others do not even offer one. It is
standard on all of the G-FORCE Racing Gear full-face
helmets |
